Page 1
Firmware Update Instruction Manual This manual will guide you through downloading the latest MP300 firmware from Panduit website, and updating the firmware of your MP300. Important! Settings is erased due to the update. During the update, be sure to use the AC adapter to supply the power to the printer instead of using the lithium-ion battery or alkaline batteries.
Download “UpdaterMP300_V1100.exe” from Panduit website, and save it to your desktop. https://www.panduit.com/en/support/download-center/identification-software-firmware-and-printers.html 2. Firmware Update Procedure Follow the procedure below to update the firmware of your MP300. 1. Put the MP300 into “update” mode to turn on the printer in the “update” mode.
Page 3
2. Update the firmware CAUTION Only one printer can be updated at a time. Do not connect two or more printers to the computer via USB. During the update, do not turn the printer off or disconnect the USB cable. Connect the printer to the computer with a USB cable.
Page 4
How to confirm if the update was completed successfully Disconnect the USB cable from the printer. Press Preference screen appears. Select [Version]. The firmware version is displayed. If the version is “1100”, the update has successfully completed. DWG# 1003659 Rev 1100...
Page 5
Check if the USB cable is firmly connected to the printer and the computer. Then retry the update. >> Update the firmware MP300 is not connected. Put your MP300 into “update” mode, and then connect it to the computer. DWG# 1003659 Rev 1100...