Table of Contents
Advertisement
MicroHAWK V/F430-F with Ring Light Window and LED
Installation
Window Kit Hardware, MicroHAWK V/F430-F with Ring Light
Qty
Description
1
Window Assembly (included)
1
Window Gasket (included)
#2-56 X 3/8" Phillips Flat Head Screw (included)
2
#4-40 X 1/4" Phillips Pan Head Screw w/ Lock
4
Washers (included)
1
Phillips Torque Wrench (not included)
LED Kit Hardware, MicroHAWK V/F430-F with Ring Light
Qty
Description
1
LED Board Kits (included)
1
Window Gasket (included)
2
#2-56 X 3/8" Phillips Flat Head Screw (included)
4
#4-40 X 1/4" Phillips Pan Head Screw w/ Lock
Washers (included)
1
Phillips Torque Wrench (not included)
Window Removal, MicroHAWK V/F430-F with Ring Light
Step 1: Disconnect power from the camera.
Step 2: Unscrew the four #4-40 pan head screws that secure the window.
Step 3: Remove the gasket from around the window frame.
Step 4: If not replacing the LED Board, go to step 8. If replacing the LED Board, unscrew the two #2-56
flat head screws that secure the diffuser.
Note: Do not touch the electronics or lens, as this may cause damage.
Part Number
V430-AF0R (Window)
V430-AF1R (Diffuser)
N/A
Part Number
V430-ALR (Red LEDs)
V430-ALW (White LEDs)
V430-ALB (Blue LEDs)
V430-ALI (IR LEDs)
N/A
Advertisement
Table of Contents
