Table of Contents
Advertisement
Polarizer Kit Hardware, MicroHAWK ID-20/MV-20
Qty
Description
1
Kit, Polarizer, MicroHAWK ID/MV-20
Polarizer Kit Installation, MicroHAWK ID-20/MV-20
Step 1: Peel the protective liner from adhesive on the polarizer.
Step 2: Rest the narrow edge of the polarizer on the bottom edge of the window opening at an angle as
shown below.
Step 3: Center the polarizer left-to-right in the window opening.
Step 4: Affix the polarizer to the window.
Step 5: Run your finger over the surface of the polarizer using light pressure to complete the bond.
Kit Part Number
98-9000062-01
Advertisement
Table of Contents
