INTRODUCTION Thank you for purchasing this CLARKE Sprayer, designed only for use with insecticides or other water-based products. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
The sprayer is supplied with an accessories pack containing the following items. The numbers in brackets refer to the diagram/list on pages 6 & 7Any deficiencies should be reported to your Clarke dealer.. 2 x Connecting collets (46) 1 x Handle securing clip (17)
4. Squeeze the trigger of the spray gun to start spraying. 5. If spraying continuously, squeeze the trigger and engage the trigger lock by sliding it back with your thumb. 6. Pump the operating arm when necessary to maintain pressure. •...
3. Unscrew the retaining ring and withdraw the pump from the container. • The pump will lift out of the container, complete with felt seal and rubber o-ring. 4. Draw the piston out of the cylinder to expose the cup seal. 5.