Table of Contents
Advertisement
Docking System
WARNING
Carrying the system incorrectly can
cause the digital reporting monitor to
disengage from the docking system and
may result in property damage and/or
serious injury.
Mounting the CS6x Versa onto
the rM200
1. Push the red slide locks on the rM200
inwards.
2. Place the CS6x Versa hanger over the
rM200.
Red slide
locks
3. Push the slide locks out so they lock
the CS6x Versa hanger into place.
4. Hang the CS6x Versa on the rM200.
To remove, push the slide locks inwards to
unlock the hanger.
24 – English – rM200
Mounting the CS65x or CS12x
onto the rM200
To mount the CS65x or CS12x monitor onto
the rM200, follow these steps:
1. Push red slide locks inwards so that
they do not obstruct the kick stand.
2. Unfold the kick stand from the bot-
tom of the monitor, and hold the sys-
tem so that it is parallel to the back
of the rM200. Place the monitor onto
the rM200.
3. Reset the red locks on the rM200 so
they lock the monitor into place.
Front Cover Handle
To remove the monitor from the rM200, push
the red locks on the rM200 and remove the
monitor. You may return the kick stand to its
folded position.
Kickstand
Advertisement
Table of Contents
