Emerson RIDGID SeeSnake Max rM200 Series Operator's Manual page 26

Table of Contents

Advertisement

Disposal
Parts of your system contain valuable mate-
rials that can be recycled. There are compa-
nies that specialize in recycling that may be
found locally. Dispose of the components in
compliance with all applicable regulations.
Contact your local waste management au-
thority for more information.
EC Countries: Do not dis-
pose of electrical equipment
with household waste!
According to the Europe-
an Guideline 2012/19/EU for
Waste Electrical and Elec-
tronic Equipment and its im-
plementation
legislation, electrical equip-
ment that is no longer usable
must be collected separately
and disposed of in an environ-
mentally correct manner.
Battery Disposal
EC Countries: Defective or used batteries
must be recycled according to the guideline
2006/66/EEC.
26 – English – rM200
Appendix
Appendix A: Stow Bin
Instructions
Can Holder Orientation
NOTICE
To orient the can holder, follow these steps:
1. Remove the can holder (Item 1) and
into
national
2. Install the can holder on the other side
The can holder on the stow
bin must be on the front
side of the rM200 case so
that it does not interfere
with the pull handle.
the replacement plate (Item 2) with a
Phillips screwdriver from inside of the
stow bin.
2
1
of the stow bin and screw the replace-
ment plate into place.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ridgid seesnake max rm200aRidgid seesnake max rm200b

Table of Contents