Emerson RIDGID SeeSnake Max rM200 Series Operator's Manual page 27

Stow Bin Installation
To install the stow bin on the rM200 case,
follow these steps:
1. Push the black button on the inside of
the stow bin.
2. Align the groove on the underside of
the stow bin (Item 1) with the eyelet
on the rM200 case (Item 2). Push and
fit into place.
3. To secure the stow bin, pull and snap
the front and back hooks into the clos-
est groove on the rM200 case.
Note: The stow bin comes with two rubber
plugs that can be inserted into the bottom
of the main compartment and can holder.
The can holders also contain a magnet at
the bottom to securely hold can in place.
1
2
To remove the stow bin, follow these steps:
1. Unlatch the stow bin hooks from the
rM200's front and rear case.
2. Push the black button on the inside of
the stow bin.
3. Pull the stow bin straight off the rM200
case.
rM200 – English – 27