Using Your Answering System - Uniden EXAI378 Owner's Manual

Using Your Answering System

The message counter displays the number of messages stored in memory. If the
display flashes, then there are new messages are waiting for you. The flashing
number represents the number of new messages, not total messages. The EXAI378
series is designed to play your new messages first. After you play all your new
messages, you can then play your old messages.
When the answering system is full,
"No remaining time". You should delete some messages so that the system can record new
messages.(Refer to "Deleting a message" on page 49.)
Playing your messages
status
is displayed on the base, and the system announces
1)Press play/stop.
The system announces the number of new and old
messages. The LED displays the number of new
messages, and the number flashes. The day and time
that each message was received is announced after the
message is played. The message counter displays the
number of current messages stored.
When all new messages have been played, you hear a
confirmation tone and an announcement "End of
messages". The system returns to standby.
2)After you have reviewed your new messages, you can
play your old messages by again pressing play/stop.
Once you have listened to a new message, it becomes
an old message. The old messages will be played in the
order in which they were received.
T H E I N T E G R A T E D A N S W E R I N G D E V I C E
To stop playing your
messages, press
play/stop again at
any time.
[ 47 ]