Mounting The Base Unit On A Wall - Uniden EXAI378 Owner's Manual

5) Connect the telephone line cord to the TEL
LINE jack and a telephone outlet once the
handset is fully charged.
If your telephone outlet isn't
modular, contact your telephone
company for assistance.

Mounting the Base Unit on a Wall

Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Plug the the AC adapter to the DC IN 9V jack.
2) Wrap the AC adapter cord inside the molded wiring
channel as shown.
3) Plug the AC adapter into a standard 120V AC wall outlet.
4) Plug the telephone line cord into the TEL LINE jack.
Wrap the cord inside the molded wiring channel
as shown.
5) Plug the telephone line cord into the telephone outlet.
6) Raise the antenna to a vertical position.
7) Align the mounting slots on the base with the mounting
posts on the wall. Then push in and down until the
phone is firmly seated.
Modular
DO NOT use an AC
outlet controlled by a
wall switch.
G E T T I N G S T A R T E D [ 13 ]