Using The Caller Id List - Uniden EXAI378 Owner's Manual

• You cannot make a
call from the Caller ID
list if your EXAI378
series is connected to
a private branch
exchange (PBX).
• When a long distance
call has been set,
" " appears in
the display.
[ 36 ] C A L L E R I D F E A T U R E S
3)Press or to select "
4)Press select or delete/ch.
When the pointer is at "
You hear a confirmation tone and all stored Caller ID
messages are deleted.
When the pointer is at "
The display returns to the summary screen.

Using the Caller ID List

Calling a party from the Caller ID list
You can place a call from the Caller ID list. The EXAI378 series stores up to 30
messages.
1) Press cid/menu. Select the phone number that you want to
dial by pressing
2) Press talk/flash. The displayed phone number dials
automatically.
Long Distance calls and Area Code Setting/Cancellation
While the incoming Caller ID information is displayed (in step 1), pressing 1 will
place or remove the prefix " " in the display to set up for a long distance call or
cancel. Pressing 3 will set or cancel an area code setting.
Dial edit
You can temporarily edit the Caller ID number that is displayed by pressing select.
A cursor appears in the display. Press delete/ch to move the cursor left, make your
changes, and then press talk/flash. This will not change the number in the
Caller ID list memory.
" or " ".
":
":
or .