Maintenance - Savo 90575 Instruction Manual

MAINTENANCE

REMOTE CONTROL (OPTIONAL)
The appliance can be controlled using a remote control pow-
ered by a 1.5 V carbon-zinc alkaline batteries of the standard
LR03-AAA type (not included).
• Do not place the remote control near to heat sources.
• Used batteries must be disposed of in the proper manner.
CLEANING METAL SELF- SUPPORTING GREASE FILTERS
Alarm signal reset
• Switch off the lights and extractor motor.
• Press button T3 for at least 3 seconds, until the leds start to
flash.
Cleaning the filters
• The filters are washable and must be cleaned when the
LED S1 lights up or at least every 2 months of operation,
or more frequently for particularly heavy usage.
• Open the lighting unit by pulling on the nocth.
• Remove the filters one at a time by pushing them towards
the back of the group and pulling down at the same time.
• Wash the filters, taking care not to bend them. Allow them
to dry before refitting.
• When refitting the filters, make sure that the handle is visi-
ble on the outside.
• Replace the lighting unit.
EN
Grease filters
1
13