Technical Data - Vents VUT 300 PBE EC User Manual

TECHNICAL DATA

The unit is designed for application with the ambient temperature ranging from +1 °C to +40 °C and relative humidity up to 80 %.
In order to prevent condensation on the internal walls of the unit, it is necessary that the surface temperature of the casing is 2-3 °C above
the dew point temperature of the transported air.
The unit is rated as a Class I electrical appliance.
Hazardous parts access and water ingress protection rating:
• IP22 for the unit connected to the air ducts;
• IP44 for the unit motors.
The unit design is constantly being improved, thus some models may be slightly different from those described in this manual.
Voltage [V/50 (60) Hz]
Maximum fan power [W]
Power of the integrated electric heater [W]
Maximum air flow [W]
Maximum unit current without a heater [A]
Current of the integrated electric heater [A]
Maximum current of the unit with an electric heater [A]
Air flow [m /h]
3
Rotation speed [min - 1 ]
Noise level, 3 m [dBA]
Transported air temperature [°С]
Casing material
Insulation, mineral wool [mm]
Filtering class of the extract filter
Filtering class of the supply filter
Connecting air duct diameter [mm]
Weight [kg]
Heat recovery efficiency [%]
Heat exchanger type
Heat exchanger material
SEC class
ø d
6
MODEL
L
L1
TECHNICAL DATA
VUT 300 PBE EC
180
1500
1680
1.4
6.5
7.9
340
3270
27
160
44
72...90
A
VUT 300 PBE EC
VUT 300/550/900 PBE EC
VUT 550 PBE EC VUT 900 PBE EC
1~ 230
297
2000
2297
2.4
8.7
11.1
620
3100
30
-25...+40
Aluzinc
20
G4
G4 (optional – F7)
200
67
78...90
Counter-flow
Polystyrene
A
www.ventilation-system.com
442
3300
3742
3.1
14.3
17.4
1030
2720
33
250
111
75...88
A