Follett Chewblet 7 Series Installation, Operation And Service Manual
  1. Manuals
  2. Brands
  3. Follett Manuals
  4. Dispenser
  5. Chewblet 7 Series
  6. Installation, operation and service manual
Follett Chewblet 7 Series Installation, Operation And Service Manual

Follett Chewblet 7 Series Installation, Operation And Service Manual

Countertop and freestanding ice and water dispenser
Hide thumbs Also See for Chewblet 7 Series:
Table of Contents

Advertisement

Quick Links

_7FS100A

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding
after-the-sale support. To ensure that this equipment delivers that same degree of service, review this guide
carefully before you begin your installation.
Should you need technical help, please call our Technical Service group at (877) 612-5086 or (610) 252-7301.
Please have your model number, serial number and complete and detailed explanation of the problem when
contacting Technical Service.

Getting Started

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. All freight
is to be inspected upon delivery. If visible signs of damage exist, please refuse delivery or sign your delivery receipt
"damaged." Follett Customer Service must be notified within 48 hours. Wherever possible, please include detailed
photos of the damage with the original packaging so that we may start the freight claim process.
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
Countertop and Freestanding Ice and Water
Dispenser with Chewblet
_7CI100A, _7FS100A, _15CI100A, _15FS100A
Installation, Operation and Service Manual
_7CI100A
_15FS100A
Ice Machine
®
230 V/50 Hz and 220 V/60 Hz
Serial numbers above K70778
_15CI100A
Installation and Service Videos:
www.follettice.com/servicevideolibrary
00976738R13

Advertisement

Table of Contents
loading

Related Manuals for Follett Chewblet 7 Series

Summary of Contents for Follett Chewblet 7 Series

  • Page 1: Welcome To Follett

    If visible signs of damage exist, please refuse delivery or sign your delivery receipt "damaged." Follett Customer Service must be notified within 48 hours. Wherever possible, please include detailed photos of the damage with the original packaging so that we may start the freight claim process.

  • Page 2: Table Of Contents

    Welcome to Follett........

  • Page 3: Before You Begin

    7 Series and 15 Series dispensers. Check your paperwork to verify that you received the correct dispenser. Follett configuration numbers are designed to provide information about the type of dispenser you are receiving. The following is an explanation of the different model numbers.

  • Page 4: Specifications

    § § Follett recommends a Follett water filter system be installed in the ice machine inlet water line (standard capacity #00130229, high capacity #00978957, carbonless high capacity #01050442). Prior to operation clean the dispenser in accordance with instructions found in this manual.

  • Page 5: Specifications

    Specifications Water WARNING! Connect to potable water supply only. § Water Mineral Content: – TDS: greater than 5 ppm (mg/l) but less than 400 ppm (mg/l) – Hardness: Less than 200 mg/l (12 gpg) § Not recommended for use with softened water §...

  • Page 6: Series Detailed Drawing

    Specifications (continued) _7 Series Detailed Drawing Countertop models 37.1 cm (14.62") 37.1 cm (14.62") 44.7 cm 44.7 cm (17.59") (17.59") 20.3 cm 17.5 cm (8.00") (6.88") 6.04 cm 7.62 cm 56.2 cm (22.12") (2.38") (3.00") 1/4" MPT water inlet Freestanding models 37.1 cm (14.62") 37.1 cm (14.62") 44.7 cm...

  • Page 7: 15 Series Detailed Drawing

    Specifications (continued) _15 Series Detailed Drawing Countertop models 37.1 cm (14.62") 37.1 cm (14.62") 59.7 cm (23.50") 57.2 cm (22.50") 57.2 cm (22.50") 20.3 cm 17.5 cm (8.00") (6.88") 56.2 cm (22.12") 1/4" MPT 6.04 cm 7.62 cm (2.38") (3.00") water inlet Freestanding models 23.50"...

  • Page 8: Installation

    * If your dispenser has the internal water filter option, the water filter must Plug be installed for the dispenser to operate. Because internal components will need to be accessed for both procedures, Follett recommends Valve installing the water filter just prior to initial sanitizing.

  • Page 9: Freestanding Installation

    Optional Leg Accessory Installation Fig. 3 CAUTION! Use caution when tipping the dispenser during leg installation. Do not lay unit on back or side. DO NOT EXCEED 30° angle. Tipping more than 30° can result in compressor malfunction. 1. If installing optional 4" Leg Accessory (item# 00956300), place a 12.7 cm (5") spacer underneath the dispenser to ease installation.
  • Page 10 * If your dispenser has the internal water filter option, the water filter must Plug be installed for the dispenser to operate. Because internal components will need to be accessed for both procedures, Follett recommends Valve installing the water filter just prior to initial sanitizing.
  • Page 11 If your dispenser has the internal water filter option, the water filter must be installed for the dispenser to operate. Because internal components will need to be accessed for both procedures, Follett recommends installing the water filter just prior to initial sanitizing.

  • Page 12: Maintenance/Cleaning Mode

    Maintenance/Cleaning Mode Cleaning Mode (Dispensing Disabled) - Use when cleaning surface Fig. 10 Entering Cleaning Mode disables the User Interface and allows you to clean the outside of the dispenser without accidentally dispensing water or ice. 1. To enter Cleaning Mode, press and immediately release the maintenance/clean switch (Fig.

  • Page 13: Filter Display Indicator Activation

    Filter Display Indicator Activation Fig. 12 If you purchased your dispenser with a Follett filter, the filter display indicator activation has been preset at the factory. If you are using an “after market filter,” an adjustment may be made to activate the “Fresh Filtered Ice &...

  • Page 14: Cleaning And Sanitizing Procedure

    § 7 Series: Follow the directions on the SafeCLEAN Plus packaging to mix 3 gal (11.4 L) of Follett SafeCLEAN Plus solution. Use 100 F (38 C) water. 15 Series: Follow the directions on the SafeCLEAN Plus packaging to mix 6 gal (22.7 L) of Follett SafeCLEAN Plus solution.

  • Page 15: Service

    LEDs will turn off, and the machine will resume normal operation. Service 8000 hour bushing check (call Follett technical service group at (877) 612-5086 or +1 (610) 252-7301). Maintenance Yellow Enter Maintenance Mode by pressing and holding maintenance/clean switch for 5 seconds.

  • Page 16: Evaporator Disassembly

    Evaporator Disassembly Fig. 16 1. Disconnect power from the dispenser. 2. Turn off water supply to dispenser. 3. Remove (unscrew) chrome ice dispenser chute (Fig. 16.1). 4. Remove the drip tray (Fig. 16.2). 5. Remove the two screws (Fig. 16.3) on the front panel (behind the drip tray).
  • Page 17 10. Unplug the gear motor (three connectors) (Fig. 16). Fig. 17 11. Remove ground screw connection. 12. Remove gear motor: Fig. 18 § Remove M6 allen screw, retainer, spacer and key (Fig. 18.1). § Remove two M6x90 allen screws (Fig. 18.2). §...
  • Page 18 15. Remove M6 socket head allen screw (Fig. 20.1). Fig. 20 16. Remove compression nozzle retainer (Fig. 20.2). 17. Remove compression nozzle (Fig. 20.3). 18. Remove main housing: Fig. 21 § Disconnect vent line from T fitting (Fig. 21.1). 19. Remove three M6x25 socket head allen screws Fig.

  • Page 19: Evaporator Assembly

    21. Remove and discard mating ring and seal (Fig. 23.1). Fig. 23 22. Carefully remove auger (Fig. 23.2). WARNING! Use caution when removing auger. The auger is very sharp - handle with care to avoid personal injury. Evaporator Assembly Fig. 24 1.
  • Page 20 Install compression nozzle: Fig. 26 § Remove and inspect compression nozzle O-ring seal. Replace if damaged in any way. § Clean O-ring groove. Lubricate O-ring with Petrol-gel and reinstall. § Install compression nozzle (Fig. 26.1). § Install compression nozzle retainer (Fig. 26.2). §...
  • Page 21 11. Use screwdriver to orient auger shaft to align with motor Fig. 29 shaft keyway (Fig. 29.1). 12. Install key into keyway (Fig. 29.2). 13. Install spacer, ensure that key is captured in slot Fig. 30 (Fig. 30.1) 14. Insert screwdriver into groove of auger shaft and pry shaft Fig.
  • Page 22 16. Install screw and tighten (Fig. 32.1). Fig. 32 17. Plug in gear motor (Fig. 33). Fig. 33 § PINK to BLUE § BLACK to BLACK § GREY to WHITE § Connect ground wire with ground screw. Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...

  • Page 23: Water Feed Schematic

    Water Feed Schematic Evaporator Float Water Chute (optional) Water Solenoid Valve Filter (optional) (optional) Water Solenoid Valve Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...

  • Page 24: Bin Melt Water/Evaporator Feed/Clean Out System Schematic

    Bin Melt Water/Evaporator Feed/Clean Out System Schematic Storage Bin Vent System Schematic Storage Bin Vent Tube Reservoir Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...

  • Page 25: Refrigeration Schematic

    Refrigeration Schematic CONDENSER FILTER-DRIER CAP TUBE COMPRESSOR EVAPORATOR ACCUMULATOR LOW PRESSURE LIQUID HIGH PRESSURE VAPOR HIGH PRESSURE LIQUID LOW PRESSURE VAPOR Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...

  • Page 26: Condenser Fan Motor Removal (_7 Series Shown)

    Condenser Fan Motor Removal (_7 Series Shown) Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...

  • Page 27: User Interface Display Identification

    Exit Maintenance Mode by pressing and holding maintenance/clean switch until no longer displays. Service - Call Follett Technical Service Group 8000 hr at (877) 612-5086 or +1 (610) 252- bushing 7301. The flashing wrench indicates check that the 8000 hr bushing check is required.
  • Page 28 Internal leak in Locate leak and repair - Press dispenser reset on control board. Contact Follett if unit is leaking. Sleep mode Press either dispense button to return to normal operation. Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...

  • Page 29: Electrical Wiring Diagram

    Electrical Wiring Diagram Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...

  • Page 30: Parts

    Parts _7 Series Exterior Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...
  • Page 31 Exterior Reference # Description Part # Drip Tray Assy 00957613 Panel, Front Assy - Includes Water Nozzle and Plug 00957621 Chute, Water (water option) 00957688 Panel, Left 00932806 Panel, Right 00932798 Panel, Top 00957654 Panel, Rear 00974873 Screw, M5 x 12 Phillips 00931931 Not Shown _7 Series Packaging for Returns, Dispenser...

  • Page 32: Series Interior

    _7 Series Interior Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...
  • Page 33 Interior Reference # Description Part # Valve, Dispense Solenoid (water option) 00968917 Switch, Cleaning 00957712 Drain/Feed Tube with Cap 00957720 Valve, Failsafe Solenoid 00968925 Compressor with Mounting Hardware (230 V/50 Hz) 00968933 Compressor with Mounting Hardware (220 V/60 Hz) 01062314 Condenser 00958017 Condenser Fan and Cord...

  • Page 34: 15 Series Exterior

    _15 Series Exterior Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...
  • Page 35 Exterior Reference # Description Part # Drip Tray Assy 00957613 Panel, Front Assy - Includes Water Nozzle and Plug 01036425 Chute, Water (water option) 00957688 Panel, Left 01026343 Panel, Right 01026335 Panel, Top 01054733 Panel, Rear 01047729 Screw, M5 x 12 Phillips 00931931 Not Shown _15 Series Packaging for Returns, Dispenser...

  • Page 36: 15 Series Interior

    _15 Series Interior Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...
  • Page 37 Interior Reference # Description Part # Valve, Dispense Solenoid (water option) 00968917 Switch, Cleaning 00957712 Drain/Feed Tube with Cap 00957720 Valve, Failsafe Solenoid 00968925 Compressor with Mounting Hardware (230 V/50 Hz) 00968933 Compressor with Mounting Hardware (220 V/60 Hz) 01062314 Condenser 00958017 Condenser Fan and Cord...

  • Page 38: Series Bin Assembly

    _7 Series Bin Assembly Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...
  • Page 39 _7 Series Bin Assembly Reference # Description Part # Ice Chute, Inside Thread 0128906 Ice Transport Tubing with Insulation 00957746 Switch, Shuttle 00957753 Lid, Bin Assy 01233808 Lid, Gasket, 7 Series 01233824 Auger, Dispense 00931113 Assembly, Motor Dispense 01233865 Cap and gasket 01233816 Bin assembly, 7 Series (does not include ice transport tube and insulation) 01233840...
  • Page 40 _15 Series Bin Assembly Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...
  • Page 41 _15 Series Bin Assembly Reference # Description Part # Ice Chute, Inside Thread 01238906 Ice Transport Tubing with Insulation 01051960 Switch, Shuttle 00957753 Lid, Bin Assy 01255470 Lid, Gasket, 7 Series 01255520 Auger, Dispense 01053297 Assembly, Motor Dispense 01255546 Cap and gasket 01233816 Bin assembly, 7 Series (does not include ice transport tube and insulation) 01255496...

  • Page 42: Evaporator Assembly

    Evaporator Assembly Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...
  • Page 43 Evaporator Assembly Reference # Description Part # Gearmotor Assy 00968990 Main Housing with Front Seal and Screws 00957829 Screws, Main Housing 00957837 Auger with front seal 00957845 Ice Compression Nozzle Assy 00957852 Front Seal and O-Ring 00957860 Evaporator Assembly with Insulation 00957878 Housing, Bushing with Insulation 00957886...

  • Page 44: Base Stand

    Base Stand Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...
  • Page 45 Base Stand Reference # Description Part # Front Panel, Base 00958108 Latches with Bayonets, Base 00958116 Not Shown Tray, Base 00958124 Not Shown Packaging for Returns, Base 00957985 Miscellaneous Reference # Description Part # Not Shown Water filter cartridge, 5 micron 00968107 Not Shown IMS III sanitizer concentrate, 16 oz...
  • Page 46 Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...
  • Page 47 Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz...
  • Page 48 Please visit www.follettice.com/support to complete the Warranty Registration form. Should you have any questions, please contact Follett's technical support group at (877) 612-5086 or (610) 252-7301 and we will be happy to assist you.

This manual is also suitable for:

Chewblet 15 seriesChewblet e seriesChewblet c seriesChewblet 15ci100a seriesChewblet 15fs100a series7ci100a series ... Show all

Table of Contents