Using The System While You're Away From Home - Uniden DECT4096 Series User Manual

Using the System While You're Away from Home

You can also operate your answering system from any touch-tone
phone. Before you can use this feature, you have to program a
security code.
Programming a security code
1. With the phone in standby, open the menu and select Ans. Setup.
2. When the phone prompts you to select a line, press
, then select Security Code.
LINe2
3. Use the number keypad to enter a two-digit security code (01 to
99). Press
remember to make a note of your new security code!
Dialing in to your system
1. Call your telephone number and wait for the system to answer. (If
your answering system is off, it will answer after about ten rings
and sound a series of beeps instead of your greeting.)
2. During the greeting (or beeps), press
your security code. (You have 3 tries to enter you security code:
if you enter it wrong 3 times, the system hangs up and returns to
standby.)
3. The system announces the current time, the number of messages
stored in memory, and a help prompt. Then it starts beeping
intermittently to let you know it's waiting for your command.
4. When you hear the intermittent
beeping, enter a command from the
chart to the right.
If you don't press any keys for 15
seconds, the phone will hang up and
return to standby.
when you're finished.
ok
and immediately enter
0
0-1 Repeat message 0-1 Repeat message
0-2 Play message 0-2 Play message
0-3 Skip message 0-3 Skip message
0-4 Delete message 0-4 Delete message
0-5 Stop playback 0-5 Stop playback
0-6 Turn the system on 0-6 Turn the system on
0-9 Turn the system off 0-9 Turn the system off
1-0 Hear help prompts 1-0 Hear help prompts
or
LINe1