Resetting And Registering Handsets - Uniden DECT4096 Series User Manual

static on telephones. A DSL filter or telephone line filter usually solves
this problem. The technician who installed your DSL service might
have left some filters for you; if not, call your DSL provider or look in
any electronics store.
Plug the DSL filter into the telephone
wall jack and plug your phone's base
into the filter. Make a test call to make
sure the noise is gone.

resetting and registering Handsets

If you are having trouble with a cordless handset or if you want to
replace one, you need to clear the registration information from the
base and the handset:
Do you have the base the handset is registered to?
1. Press and hold
System Reset menu appears (about 5
seconds).
2. Select Deregister HS. The display lists
all registered handsets.
3. Select the handset you want to reset.
4. When the handset asks you to confirm,
select Yes. (It may ask you twice, just
to be sure.) The handset clears its
information from the base and deletes
it own link to the base.
When you reset a handset (or if you buy a new one), that handset
displays a Handset Not Registered message. If you see this message
on a handset, you need to register it to a base before you can use it.
Registering a handset
1. On the base, open the menu and select Register Handset. The
display should say Handset Registering.
2. On the handset you want to register, press and hold
handset display says Handset Registering (about 2 seconds).

Yes
and until the
END #
Telephone Telephone
cord cord
DSL filter DSL filter
1. Press and hold
until the System Reset
#
menu appears (about 5
seconds).
2. Select Base Unavailable.
3. When the handset asks
you to confirm, select Yes.
(It may ask you twice, just
to be sure.) The handset
deletes its own link without
contacting the base.
Telephone Telephone
wall jack wall jack
No
and
END
until the
#