Uniden DECT4096 Series User Manual page 43

If...
A cordless handset
says Unavailable.
No stations will
display any Caller ID
information.
I can't dial from the
Caller ID list.
Caller ID displays
briefly and then
clears.
I can't transfer calls.
I can't get two
cordless handsets to
talk to the caller.
The phone keeps
ringing if I answer on
an extension.
I can't save a number
to an existing
phonebook entry.
The answering
system does not
work.
The answering
system won't record
messages.
Try...
-
Moving the handset closer to the base.
-
Seeing if another station has Privacy Mode on (see
page 30).
-
Making sure the base is plugged in.
-
Letting calls ring at least twice before answering.
-
Seeing if the call was placed through a
switchboard.
-
Checking with your telephone service provider to
make sure your Caller ID service is active.
-
Making sure you entered the correct area code. If
you have to dial all 10 digits, you need to delete the
area code (see "Seven-digit Dialing" on page 23).
-
You may have to change the line mode. Contact
customer service for more information.
-
Resetting all the handsets (see page 44).
-
Making sure both handsets are registered to this
base.
-
Making sure no station is in Privacy Mode (see
page 30).
-
You may have to change the line mode. Contact
customer service for more information.
-
Seeing if the number is already in the phonebook.
-
Seeing if that entry already has two phone
numbers.
-
Making sure the answering system is turned on.
-
Making sure the base AC adapter is not plugged
into an that's controlled by a wall switch.
-
Making sure the Record Time is not set to
Announce Only (see page 36).
-
Deleting messages (the memory may be full).