Uniden DECT4096 Series User Manual page 4

Connect the power and telephone cords
1. Connect the base AC adapter to the
cord as shown:
For desktop use
2. Connect the included two-line telephone cord to the
jack. If your phone
company uses a separate
phone jack for each line,
connect a standard
telephone cord to the
jack. Route the cords
LINe 2
as shown above.
3. Connect the cord from
TEl lINE 1/2
OR
If your phone company uses a separate phone jack for each line,
connect the cord from
connect the cord from
4. Plug the AC adapter into a standard 120 V AC power outlet.
Place the phone on the wall
1. On the front of the base,
pull the clip that holds the
corded handset in place
out of its slot.
2. Rotate the clip 180 degrees.
3. Flip it from front to back and slide it
back into the slot.

DE SK DE SK
WA LL
TeL
to a two-line phone jack.
TEl lINE 1/2
TeL LINe 2
AC IN 7.8V
For wall mount use
A C IN 7. 8V TE L LI N E 2 TE L LI N E 1/ 2 A C IN 7. 8V TE L LI N E 2 TE L LI N E 1/ 2
IF you have a separate IF you have a separate
jack for line 2, connect jack for line 2, connect
another phone cord here. another phone cord here.
to the jack for line 1; then,
the jack for line 2.
jack and route the
DE SK
WA LL
WA LL
TEl lINE 1/2
Connect the Connect the
telephone cord telephone cord
here first. here first.
D E S K D E S K
W A L L W A L L