Table of Contents
Advertisement
UP306BH (DSS2415) ENG OM
12/27/04
Submenu name
AutoTalk
Allows you to answer the phone without pressing
When the AutoTalk is set to On, simply remove the handset from the cradle
and the phone automatically answers the call (see page 16).
Anykey Answer
Allows you to answer the phone without pressing
When the Anykey Answer is On, you can answer a call by pressing any number
key,
Banner
Customize the name of your handset, and display it in the LCD in the standby
mode. For example, you can name the handset "John" (see page 17).
Contrast
Adjust the handset LCD brightness for better viewing (10 levels) (see page 17).
Global Setup
If you change the setting in one of the handsets, you change the settings for all
handset(s) in the Global Setup menu. Only one handset can change a setting at a time.
Submenu name
Name Tag (POP ID)
Display the stored name with the Caller ID telephone number, if the displayed
Caller ID telephone number is exactly the same as a number stored in the
phone book (see page 18).
Insert 0
Add "0" or "00" to the number, when you receive the Caller ID message
(New Zealand only)
(see page 18).
Day & time
Set the day and time of your display (see page 18).
System Reset
This menu is used to clear the handset ID from the base, or the base ID from
the handset.
Submenu name
Deregister HS
Clear the handset ID from the base. Use this menu, for example when
you change the digital security code (see page 19).
Replacing Base
Clear the base ID. Use this menu, for example, if you wish to deregister
the base to use the handset with another base of the DSS series.
(DSS2415/DSS2455/DSS2465 series) (see page 19).
5:34 PM
Page 13
Description
or
on the handset (see page 17).
Description
Description
or
.
or
.
[ 13 ]
Advertisement
Table of Contents
