Unpacking And Checking The Item Delivered - Siemens SIMATIC Panel PC 870 Equipment Manual

Starting Up the Computing Unit
2.1

Unpacking and checking the item delivered

Unpacking the item
Unpack the item delivered to you as follows:
1. Remove the packaging.
2. Do not throw the original packaging away. Keep it in case you have to transport
your PC at some time in the future.
3. Please keep the enclosed documentation in a safe place. You will require it
when you first start up the item delivered to you and it is part of the device.
4. Check the packaging and the package contents for any visible damage.
5. Check the delivered item against the packaging list for completeness. When
doing so, you should also take into observe accessories which you can order
separately.
6. Should you detect any transport damages or inconsistencies between
packaging contents and packaging list, please inform your sales office.
Recording the serial number (F-No.)
1. Record the serial number of your computing unit in the table; you will find it on
the nameplate above the floppy disk drive on the side of the device.
The repair center will be able to identify the device by the F-No. if it is submitted
for repair.
Recording the Microsoft Windows product key of the Certificate of Authenticity
2. Record the Microsoft Windows product key of the Certificate of Authenticity
(COA) in the table; you will need it if the operating system needs to be
reinstalled. The key is to be found on the device.
F–No.
Order number
Microsoft Windows product key
2-2
Panel PC 870 Computing Unit Equipment Manual
Edition 12/01