Setup and Operation
TI7035
™
1.
Take Hurricane
Electric Dispense System out of the box. 2.
TI7052
3.
Use a utility knife to cut suction hose (2) to the appropriate
length for your container.
TI7039
5.
Feed suction hose (2) through support tube (4) being
careful to keep slots (a) on support tube (4) vertical to line
up with holes on inlet port.
311216J
Dispenser unit shown
34 cm
(13 in)
2
a
4
2
Bung
adapter (6)
Check that all unassembled parts shown are present.
4.
Slide hose clamp (21) onto suction hose (2), press end of
suction hose on to barbed fitting (19) at back of unit and
slide clamp over barbed fitting. Tighten clamp screw
securely.
17
6.
Insert 2 screws (17), provided with pump through slots in
support tube (4) and into the holes on inlet port. Tighten
securely.
Setup and Operation
Clamp (13)
Inlet hose
clamp(21)
Black
plastic
barbed
fitting
(18)
2 screws
(13)
Inlet
strainer (20)
19
21
2
TI7037
4
17
TI7040
5