Activating.the.Message.Alert
The Message Alert feature sounds a short alert tone every fifteen seconds whenever you have a new message.
Once all new messages have been played, the alert tone automatically stops beeping until you receive another new
unplayed message.
) Press [clock/menu] on the base.
2) Press [cid.select/ ] to move the pointer to select MESSAGE ALERT, and then
press [set].
3) Press [cid.select/ ] or [cid.select/ ] to select ON or OFF.
4) Press [set]. You will hear a confirmation tone.
To quickly turn off the Message Alert tone, press any key on the base unit; the tone will automatically quiet until you
receive another new message.
Setting a Security Code or Personal Identification Number (PIN)
To play your messages from a remote location outside of your home, you will need to enter a two-digit Security code
or Personal Identification Number (PIN).
) Press [clock/menu] on the base.
2) Press [cid.select/ ] to move the pointer to select SECURITY CODE, and then
press [set].
3) Enter a two-digit Security or PIN code (01-99) using the number keypad. To change the number, use [ ] (delete)
to backspace.
4) Press [set]. You will hear a confirmation tone.
44
Message Alert:
Message Alert:
0
0
Off
Off
Press
Press
/
/
or set
or set
Security Code:
Security Code:
0
0
80
80
Press 0‑9 or set
Press 0‑9 or set