Uniden CXA 15698 Owner's Manual page 29

To.cancel.speed.dialing
If accessing the list when the phone is in standby, press [end] ([
If accessing the list during an active call, press [mem/menu] ([mem] on the base) to exit the list immediately.
If no key is pressed for thirty seconds, the cordless handset or base will exit the speed dial list automatically.
Note: Pressing [end] on the handset or [ ] (speaker) on the base to exit the speed dial list during a
call.will.disconnect.the.call.immediately.
Making.a.Call.from.the.Caller.ID.List
You can place a call directly from the Caller ID list.
) When the phone is in standby, press [
[ ] to select the phone number that you want to dial.
2) To have the phone dial a "" before the displayed Caller ID number, press [1]. To have the
phone dial the stored area code before the displayed Caller ID number, press [3].
3) Press [talk/flash] ([ ] (speaker) on the base) or pick up the corded handset from the base. The displayed phone
number dials automatically.
Note:.
• From the base, you can also press [ ] (speaker) or pick up the corded handset from the base
before you access the Caller ID list. When you come to the phone number you want to dial, press
[set].
•. You.cannot.make.a.call.from.the.Caller.ID.list.if.your.phone.is.connected.to.a.private.branch.
exchange.(PBX).
] (play/stop) on the base).
/cid] ([cid] on the base) in standby. Use [
28
] or
5/17 12:30PM 5/17 12:30PM
Jane Smith Jane Smith
214‑555‑1234 214‑555‑1234