Activating The Message Alert; Activating Call Screening; Setting A Security Code Or Personal Identification Number (Pin) - Uniden WDSS 5335+1 Owner's Manual

Activating the Message Alert

The message alert feature sounds a short alert tone every 5 seconds whenever you have a new message.
To turn on the message alert:
From the handset:
) Press [menu/clear]. Select the ANSW. SETUP menu, and then the MESSAGE ALERT submenu.
2) Move the cursor to select ON or OFF.
3) Press [select/ ]. You will hear a confirmation tone.

Activating Call Screening

Your phone allows you to listen to callers leaving you a message. This call screen feature can be turned on or off.
From the handset:
) Press [menu/clear]. Select the ANSW. SETUP menu and then the CALL SCREEN submenu.
2) Move the cursor to select ON or OFF.
3) Press [select/ ]. You will hear a confirmation tone.

Setting a Security Code or Personal Identification Number (PIN)

To play your messages from a remote location, you will need to enter a two-digit security code or Personal
Identification Number (PIN). The default security code is 80.
From the handset:
) Press [menu/clear]. Select the ANSW. SETUP menu, and then the SECURITY CODE submenu.
2) Use the number keypad ([0] through [9]) to enter a two-digit security code (0-99).
3) Press [select/ ]. You will hear a confirmation tone.
46