Activating Call Screening; Setting The Number Of Rings - Uniden CXA 15698 Owner's Manual

Activating.Call.Screening
Your phone allows you to listen to callers leaving you a message. This feature can be turned on or off with the
following steps:
) Press [clock/menu] on the base.
2) Press [cid.select/ ] to move the pointer to select CALL SCREENING, and then
press [set].
3) Press [cid.select/ ] or [cid.select/ ] to select ON or OFF.
4) Press [set]. You will hear a confirmation tone.
Setting.the.Number.of.Rings
The ring time setting allows you to set the number of rings the caller hears before your answering machine plays the
outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable the Toll Saver, the
answering machine picks up after two rings if you have new messages and after four rings if there are none.
) Press [clock/menu] on the base.
2) Press [cid.select/ ] to move the pointer to select RING TIME, and then press
[set].
3) Press [cid.select/ ] or [cid.select/ ] to select a Ring Time (TOLL SAVER, 2 TIMES, 4 TIMES, or 6 TIMES).
4) Press [set]. You will hear a confirmation tone.
43
Call Screening: Call Screening:
0 0 On On
Press Press / / or set or set
Ring Time: Ring Time:
0 0 Toll Saver Toll Saver
Press Press / / or set or set