Setting Your Outgoing Message (Greeting) - Uniden CXA 15698 Owner's Manual

Setting Your Outgoing Message (Greeting)

When you receive a call, the answering machine automatically plays either a preset message or your own greeting.
Your answering machine comes with the following preset message:
"Hello, no one is available to take your call. Please leave a message after the tone."
If the answering machine is set to announce only, the preset greeting automatically changes to:
"Hello. No one is available to take your call. Please call again."
See "Setting the Record Time (or Announce Only)" on page 42 on how to set the announce only feature.
Or you can record your own personal outgoing greeting. Your recorded greeting must be between two seconds and
thirty seconds long. Once you have recorded a personal greeting, you can switch back and forth between the preset
greeting and your own personal greeting.
To Record a personal outgoing message (Greeting)
) With the phone in standby, press [greet]. While the preset message is playing,
press and hold [greet] again. You will hear the announcement "Record greeting"
and a confirmation tone.
If you already have a greeting recorded, you can delete the current one and then record a new greeting. While
the current greeting is playing, press [ ] (delete). And then start over with the first.
2) Start recording your message. You will have thirty seconds, and the message counter will count down.
45
Record Greeting: Record Greeting:
0 0
30 sec 30 sec