Flash And Call Waiting; Storing A Phone Number In Memory; Dialing A Stored Number; Memory Dial - Uniden XS210 Owner's Manual

XS210.Qx 10/6/03 5:27 PM
You must subscribe through
your local telephone
company to the Call Waiting
Service.
You have 30 seconds after
pressing to enter
the number you wish to
store.
Otherwise, the handset will
beep rapidly.
The pause button counts as
one digit. Pressing
more than
once increases the length of
pause between numbers.
If you select a memory
location that does not have a
stored number, the handset
will beep rapidly and the
phone will not dial.
Page 8

FLASH AND CALL WAITING

If the call waiting tone sounds during a call:
AUSTRALIA: Press , then
between callers.
NEW ZEALAND: Press
callers.

STORING A PHONE NUMBER IN MEMORY

Your cordless phone has 1 Rocket Dial memory location and 10 additional
memory locations for storing important telephone numbers. You can store
your most frequent dialed number in the one-touch Rocket Dial location.

Memory Dial

1) Remove the handset from the base.
2) Press . The talk/batt low LED
flashes.
3) Enter the phone number, up to 20 digits.
4) Press again.
5) Press memory location (
to store the number.
A tone indicates that the number is stored. If you enter a number in a
location that has a previously stored number it will overwrite the existing
number without warning.

Rocket Dial

Follow step 1-4 above then at Step 5. Press
store to your number into the Rocket Dial location.
PAUSE
If a pause is needed during the dialing sequence for services such as
Telephone banking, Press "pause/redial" to insert a pause. Each pause
counts as a digit and represents a two second delay in time between digits as
they are sent.

DIALING A STORED NUMBER

Using the memory location features
1) Press , then press
2) Enter the memory location (
automatically dials.
to switch
to switch between
) on the keypad
on the keypad to
.
) on the keypad. The stored number
7