Storing A Phone Number In Memory - Uniden EXV 990 Owner's Manual

Color profile: Disabled
Composite Default screen
When the voice prompt says
"Enter the phone number
then press store," if you do
not make an entry within 10
seconds, the handset beeps
and the programming
procedure cancels.
When the voice prompt says
"Say yes or no," if you don't
say anything within 3
seconds, you will hear
"closer please." If you still
don't respond, the handset
beeps and the programming
procedure cancels.
If you need a pause to
separate groups of numbers
during dialing, press
pause
This 4 second counts
pause
as one digit. Pressing
pause
more than once increases
the length of the pause
between numbers.
C:\Exv990\exv990 1 of 2.vp
Wed Sep 09 09:09:47 1998

STORING A PHONE NUMBER IN MEMORY

With VoiceDial, programming is easy.
Just follow the preprogrammed
voice prompts. (See page 18 for
Voice Memory Entry Tips.)
1) Remove the handset from the base.
2) Press . The
store
LED lights.
speaker
You will hear:
For example: Press
To automatically select the first available
(empty) memory location, press 0 , then 0 .
3) You will hear:
Without a pause between the names, say: "John Smith."
Then you will hear:
To confirm, repeat the name, "John Smith." If you don't
respond within 3 seconds, you will hear "closer please." If
you still don't respond, the handset beeps and the
programming procedure cancels.
You can skip the VoiceDial and enter a phone number
in memory without a name. Enter the number on the
keypad, then press store (go to step 5.)
.
4) You will hear:"
the keypad, enter the phone number then press
Use the keypad to enter the number you want to store
(up to 16 digits.) For example: enter
555-5555; then press
If you press
cancel
number, you will return to step 4.
5) You will hear:
Then, you will hear a confirmation beep.
LED blinks and, in speaker mode, the
talk
, then .
0 1
.
store
while entering a
On
.
store
13