Precautions For Installation And Handling - SATO CT4-ex-RF Operator's Manual

2 Precautions for Installation and Handling

Printer operation can be affected by the printer environment.
Refer to the following instructions for installation and handling of the CT4-ex-RF
printer.
Select a Safe Location
Place the printer on a surface that is flat and level.
If the surface is not flat and level, this may cause bad print quality. This may also
cause a malfunction and decrease the life span of the printer.
Do not place the printer on a location that produces vibration.
Giving serious vibration or shock to the printer may cause a malfunction and
shorten the life span of the printer.
Keep the printer out of high temperature and humidity.
Avoid locations subject to extreme or fast changes in temperature or humidity.
Do not place the printer in a location subject to water or oil.
Do not place the printer in a location where it will be exposed to water or oil.
Water or oil entering inside the printer may cause a fire, electric shock or
malfunction.
Avoid dust.
Dust build up may result in bad print quality.
Keep out of direct sunlight
This printer has a built-in optical sensor. Exposure to direct sunlight will make the
sensor less responsive and may cause the media to be sensed incorrectly. Close
the top cover when printing.
Power Supply
This printer requires an AC power supply.
Be sure to connect the printer to an AC power supply.
Connect the power cord to a grounded power outlet.
Make sure that the printer is connected to a grounded power outlet.
Supply a stable source of electricity to the printer.
When using the printer, do not share its power outlet with other electrical devices
that could cause power fluctuations and performance issues with your printer.
8