Ir Sensor Board - HP Envy 13 Series Maintenance And Service Manual

Reverse this procedure to install the system board.

IR sensor board

Description
IR sensor board
IR sensor board cable
Before removing the IR sensor board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the heat sink (see
5. Remove the system board (see
To remove the IR sensor board::
1. Remove the IR sensor board M2.0 × 1.0 screw from the IR board (1).
52 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page 39).
Heat sink on page 48.
System board on page
Spare part number
L94039-001
L94040-001
38).
50).
37).