System Board - HP Envy 13 Series Maintenance And Service Manual

System board

Table 5-9 System board descriptions and part numbers
Description
System board including integrated Intel Core i7-1051 U processor and 16 GB of discrete graphics
memory
System board including integrated Intel Core i7-1051 U processor and 8 GB of discrete graphics memory
System board including integrated Intel Core i7-1065 G7 processor and 8 GB of UMA graphics memory
System board including integrated Intel Core i5-1021 U processor and 8 GB of discrete graphics memory
System board including integrated Intel Core i5-1035 G4 processor and 8 GB of UMA graphics memory
System board including integrated Intel Core i5-1035 G1 processor and 8 GB of UMA graphics memory
Before removing the system board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the solid-state drive (see
To remove the system board:
1. Disconnect the following cables from the system board. If necessary, pull back the Mylar cover to access
specific cables.
NOTE:
(1) Mylar cover
(2) Power connector cable
(3) Camera cable
(4) Display cable
(5) Backlight cable
(6) Keyboard cable
(7) WLAN antenna cable
(8) Fingerprint reader cable
(9) Touchpad cable
(10) Speaker cable
50 Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover and rubber feet on page
Battery on page
On select products, the size and shape of the Mylar cover may vary from the illustration.
(Preparation for disassembly on page
39).
Solid-state drive and Optane Memory Module on page
Spare part number
L94594-601
L94593-601
L94591-601
L94592-601
L94590-601
L94589-601
37).
38).
43).