Display; Low Blue Light Mode (Select Products Only) - HP Envy 13 Series Maintenance And Service Manual

Display

Low blue light mode (select products only)

Your computer display is shipped from the factory in low blue light mode for improved eye comfort and
safety. Also, blue light mode automatically adjusts blue light emissions when you are using the computer at
night or for reading.
WARNING!
workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort
Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is
available on the web at http://www.hp.com/ergo.
Table 2-3 Display components and their descriptions
Component
(1) WLAN antennas*
(2) Internal microphones
(3) Camera
(4) Camera light
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the
antennas free from obstructions.
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
Description
Send and receive wireless signals to communicate with wireless local
area networks (WLANs).
Record sound.
Allows you to video chat, record video, and record still images. Some
cameras also allow a facial recognition logon to Windows, instead of
a password logon.
NOTE: To turn the camera on or off, press the camera privacy key.
When the camera is turned on, the camera light is on, and the camera
privacy key light is turned off. When the camera is turned off, the
camera light is off, and the camera privacy light is turned on.
NOTE: Camera functions vary depending on the camera hardware
and software installed on your product.
On: The camera is in use.
Display 7