Touchpad - HP Envy 13 Series Maintenance And Service Manual

Touchpad

NOTE: The touchpad spare part kit does not include the touchpad cable. The touchpad cable is available
using spare part number L87955-001. Touchpads that are included with keyboard/top covers with wood
veneer cannot be replaced.
Table 5-3 Touchpad description and part number
Description
Touchpad in pale gold finish
Touchpad in natural silver finish
Touchpad cable
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
To remove the touchpad:
1. Disconnect the touchpad cable from the touchpad connector on the system board (1).
2. Remove the two Phillips M1.6 × 3.0 screws (2) and the two Phillips M1.6 × 2.0 screws (3) that secure the
touchpad bracket to the computer.
3. Remove the touchpad bracket from the computer (4).
4. Remove the three broadhead Phillips M1.6 × 2.5 screws (5) that secure the touchpad to the computer.
5. Remove the touchpad from the computer (6).
40 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page 39).
Spare part number
L94033-001
L94034-001
L94032-001
37).
38).