Product Documentation; Product Documentation Set - ABB Relion 650 Series Commissioning Manual

Section 1
Introduction
1.3

Product documentation

1.3.1

Product documentation set

IEC07000220 V1 EN-US
Figure 1:
The engineering manual contains instructions on how to engineer the IEDs using the different
tools in PCM600. The manual provides instructions on how to set up a PCM600 project and
insert IEDs to the project structure. The manual also recommends a sequence for engineering
of protection and control functions, LHMI functions as well as communication engineering for
IEC 60870-5-103, IEC 61850 and DNP3.
The installation manual contains instructions on how to install the IED. The manual provides
procedures for mechanical and electrical installation. The chapters are organized in
chronological order in which the IED should be installed.
The commissioning manual contains instructions on how to commission the IED. The manual
can also be used by system engineers and maintenance personnel for assistance during the
testing phase. The manual provides procedures for checking of external circuitry and
energizing the IED, parameter setting and configuration as well as verifying settings by
secondary injection. The manual describes the process of testing an IED in a substation which
is not in service. The chapters are organized in chronological order in which the IED should be
commissioned.
The operation manual contains instructions on how to operate the IED once it has been
commissioned. The manual provides instructions for monitoring, controlling and setting the
IED. The manual also describes how to identify disturbances and how to view calculated and
measured power grid data to determine the cause of a fault.
6
Engineering manual Engineering manual Engineering manual
Installation manual Installation manual Installation manual
Commissioning manual Commissioning manual Commissioning manual
Operation manual Operation manual Operation manual
Service manual Service manual Service manual
Application manual Application manual Application manual
Technical manual Technical manual Technical manual
Communication protocol Communication protocol Communication protocol
manual manual manual
The intended use of manuals in different lifecycles
© Copyright 2011 ABB. All rights reserved
1MRK 505 264-UEN A
GUID-3AA69EA6-F1D8-47C6-A8E6-562F29C67172 v9
en07000220.vsd
Busbar protection REB650
Commissioning manual