Introduction; This Manual; Intended Audience - ABB Relion 650 Series Commissioning Manual

Busbar protection version 1.1 iec

Hide thumbs Also See for Relion 650 Series:

Table of Contents

1MRK 505 264-UEN A

Section 1

1.1

The commissioning manual contains instructions on how to commission the IED. The manual

can also be used by system engineers and maintenance personnel for assistance during the

testing phase. The manual provides procedures for checking of external circuitry and

energizing the IED, parameter setting and configuration as well as verifying settings by

secondary injection. The manual describes the process of testing an IED in a substation which

is not in service. The chapters are organized in chronological order in which the IED should be

commissioned.

1.2

This manual addresses the personnel responsible for commissioning, maintenance and taking

the IED in and out of normal service.

The commissioning personnel must have a basic knowledge of handling electronic equipment.

The commissioning and maintenance personnel must be well experienced in using protection

equipment, test equipment, protection functions and the configured functional logics in the

IED.

Busbar protection REB650

Commissioning manual

Introduction

Section 1

Introduction

GUID-AB423A30-13C2-46AF-B7FE-A73BB425EB5F v11

GUID-C9B8127F-5748-4BEA-9E4F-CC762FE28A3A v6

Table of Contents

Relion reb650