FOR SAFE DRIVING
Seat Belt Inspection
EXAMPLE
Periodically inspect the seat belts to make
sure they work properly and are not dam-
aged. Check the webbing, buckles, latch
plates, retractors, anchorages, and guide
loops. Replace any seat belts which do not
work properly or are damaged.
1-15
WARNING
Inspect all seat belt assemblies after
any collision. Any seat belt assembly
which was in use during a collision
(other than a very minor one) should
be replaced, even if damage to the
assembly is not obvious. Any seat
belt assembly which was not in use
during a collision must be replaced if
the airbags and the seat belt preten-
sioners activated. The airbags, the
pretensioners and the load limitter
will only function once. In case they
did not activate, consult with a Maruti
Suzuki authorised workshop.
65D209S
Child Restraint Systems
EXAMPLE
The following types of child restraint sys-
tem are available generally.
Infant restraint - rear seat only
Child restraint
60G332S
EXAMPLE
79J221
EXAMPLE
64L30820
72RH0-74E
Need help?
Do you have a question about the Ertiga Tour M and is the answer not in the manual?