MARUTI SUZUKI Ertiga Tour M Owner's Manual page 16

FOR SAFE DRIVING
Driver's seat belt reminder
If the driver's seat belt remains unbuckled
when the ignition switch is in "ON" position,
the reminder works as follows:
1) The driver's seat belt reminder light will
come on.
2) After the vehicle's speed has reached
about 15 km/h, the driver's seat belt
reminder light will blink and a buzzer
will sound for about 95 seconds.
3) The reminder light will remain on until
the driver's seat belt is buckled.
If the driver has buckled his or her seat belt
and later unbuckles the seat belt, the
reminder system will be activated from
Step 1) or 2) according to the vehicle's
speed. When the vehicle's speed is less
than 15 km/h, the reminder will start from
Step 1). When the vehicle's speed is more
than 15 km/h, the reminder will start from
Step 2).
The reminder will be automatically can-
celed when the driver's seat belt is buckled
or the ignition switch is turned off.
1-13
Front passenger's seat belt reminder
If there is a person sitting in the front pas-
senger seat and the front passenger seat
belt is unbuckled when the ignition switch
is in "ON" position, the front passenger's
seat belt reminder will activate.
EXAMPLE
(2)
(2) The sensor of the front passenger's
seat belt reminder
The seat belt reminder sensor (2) detects
whether a person is sitting in the front seat.
The sensor of the front passenger's seat
belt reminder is located in the seat cush-
ion. The front passenger's seat belt
reminder works in the same manner as the
driver's seat belt reminder.
WARNING
It is absolutely essential that the
driver and passengers fasten their
seat belts at all times. Persons who
are not fastening seat belts have a
much greater risk of injury if an acci-
dent occurs. Make a regular habit of
buckling your seat belt before putting
the key in the ignition or pressing the
engine switch.
CAUTION
• Do not spill liquid or semi-solid on
the front passenger's seat. If you
spill it on the front passenger's
seat, immediately wipe it dry with a
soft cloth. Contact of liquid with
sensor may impact the function of
69RH203
seat belt reminder sensor.
• Do not place any sharp or heavy
object on passenger seat which
can penetrate through seat uphol-
stery and can cause damage to
sensor.
72RH0-74E