Procedure "Leave; Restart Of A Measuring Group - WYLER BlueSYSTEM BASIC Manual

2.4.2 P
ROCEDURE
Using the function "LEAVE" unleashes an existing measuring group.
1. Press the <ON/MODE> button on the BlueMETER
BASIC repeatedly until the menu [LEAVE] appears
on the display. Confirm with <ENTER>.
2. During the log-off the blue LED under "LINK" is lit
continuously, the green LED "READY" is blinking
or does not shine any more.
3. After successful completion the green LED is
blinking for approx. 1 second. This erminates the
process.
2.5 R
ESTART OF A MEASURING GROUP
After a measuring group has been stopped e.g. after the termination of a measurement, the group of instruments
remains intact. After the restart the communication is automatically activated and the communication is started. The
process JOIN must not be repeated.
"LEAVE"
page 11 of 84