Table of Contents
Advertisement
Available languages
Available languages
Quick Links
People's lives depend on your safe installation of our products. It is
important to read, understand and follow all instructions shipped
with the products. In addition, listed below are some other important
safety instructions and precautions you should follow:
•
To properly install this light, you must have a good understand
ing of automotive electrical procedures and systems, along with
proficiency in the installation and use of safety warning equip
ment.
•
DO NOT install equipment or route wiring or cord in the deploy
ment path of an airbag.
•
If a vehicle seat is temporarily removed, verify with the vehicle
manufacturer if the seat needs to be recalibrated for proper air
bag deployment.
•
When drilling into a vehicle structure, be sure that both sides of
the surface are clear of anything that could be damaged.
•
Locate light control so the VEHICLE and CONTROL can be oper
ated safely under all driving conditions.
•
Do not attempt to activate or deactivate light control while driv
ing in a hazardous situation.
•
This product contains high intensity LED devices. To prevent eye
damage, DO NOT stare into the light beam at close range.
•
You should frequently inspect the light to ensure that it is oper
ating properly and that it is securely attached to the vehicle.
•
After testing is complete, provide a copy of these instructions to
the instructional staff and all operating personnel.
•
File these instructions in a safe place and refer to them when
maintaining and/or reinstalling the product.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death to you or others.
A.
OVERVIEW
The Federal Signal QuadraFlare LED Scene Light is a self-contained, high
intensity LED light designed for mounting to the exterior of a vehicle. Model
QL97LEDSCENE QuadraFlare LED scene lights are designed for operation on 12 Vdc.
INSTRUCTIONS
QUADRAFLARE™ 9 X 7 LED SCENE LIGHT
QL97LEDSCENE
SAFETY MESSAGE TO INSTALLERS
FOR
2562451C
REV. C 310
Printed in U.S.A.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Federal Signal Corporation QUADRAFLARE QL97LEDSCENE
Summary of Contents for Federal Signal Corporation QUADRAFLARE QL97LEDSCENE
- Page 1 2562451C REV. C 310 Printed in U.S.A. INSTRUCTIONS QUADRAFLARE™ 9 X 7 LED SCENE LIGHT QL97LEDSCENE SAFETY MESSAGE TO INSTALLERS People’s lives depend on your safe installation of our products. It is important to read, understand and follow all instructions shipped with the products.
-
Page 2: Installation
UNPACKING After unpacking the light, inspect it for damage that may have occurred in transit. If the unit has been damaged, do not attempt to install or operate it. File a claim im- mediately with the carrier, stating the extent of damage. Carefully check all envelopes, shipping labels, and tags before removing or destroying them. -
Page 3: Safety Message To Operators
The QuadraFlare LED Scene Light assembly has two 12" long lead wires that exit out the back of the unit, for making electrical connections. Complete the electrical connections as described in paragraph E. Electrical Connections. See Figure 1. Align the mounting gasket and QuadraFlare LED Scene Light as sembly with the previously inserted screw grommets and secure with the provided #8 x 1-1/2 S.S. -
Page 4: Maintenance
Email: empserviceinfo@fedsig.com Replacement Parts. Description Part No. Lens Gasket 8012111 Mounting Gasket 8012100 or 8012101 Mounting Screws, #8 x 1-1/2” 7011238-24 Screw Grommet 7065073 Lens, Fluted, Clear 8012075 Clip, Heatsink 8012096 Optional Chrome Bezel w/Gasket QL97MC Copyright 2010 Federal Signal Corporation... - Page 5 INSTRUCCIONES PARA LA LUZ DEL DE LA ESCENA 9 X 7 QUADRAFLARE™ MODELO QL97LEDSCENE AVISO SOBRE SEGURIDAD PARA INSTALADORES La vida de muchas personas depende de una buena instalación de nues tros productos. Es importante que lea, entienda y siga todas las instrucciones incluidas con los productos.
- Page 6 DESEMPAQUE Después de desempacar la unidad, inspeccione si han ocurrido daños durante el envío. Si la unidad ha sufrido daños, no intente instalarla o ponerla en funcionamiento; entable una reclamación inmediatamente con el transportista, e indique la importancia de estos. Verifique cuidadosamente todos los sobres, etiquetas de envío y marbetes antes de removerlos o destruirlos.
- Page 7 El conjunto de luces LED de la escena QuadraFlare incluye dos cables conductores de 12 pulg. de largo que salen por la parte posterior de la unidad, para realizar las conexiones eléctricas. Finalice las conexiones eléctricas según se describe en el párrafo E. Conexiones eléctricas.
-
Page 8: Mantenimiento
8012100 or 8012101 Empaquetadura de montaje Tornillos de montaje, #8 x 1-1/2 pulg. 7011238-24 Ojal para tornillo 7065073 Lente, acanalada, transparente 8012075 8012096 Sostenedor para el disipador del calor Bisel cromado con empaquetadura, opcional QL97MC Copyright 2010 Federal Signal Corporation... - Page 9 INSTRUCTIONS POUR LES FEUX DEL DE SCèNE DE 9 x 7 QUADRAFLARE™ DU MODèLE DE QL97LEDSCENE CONSIGNES DE SÉCURITÉ DESTINÉES AUX INSTALLATEURS La vie des personnes dépend de votre installation sécuritaire de nos produits. Il est important de lire, comprendre et suivre toutes les instructions expédiées avec les produits.
- Page 10 Déposez immédiatement une réclamation auprès du transporteur en précisant l’étendue des dommages. Vérifiez avec soin toutes les enveloppes, étiquettes d’expédition et autres étiquettes avant de les enlever ou de les détruire. LISTE DE CONTENU DU KIT Qté Description N° de pièce Vis n°...
- Page 11 Complétez les connexions électriques tel qu’il est décrit au paragraphe E. Connexions électriques. Voir la figure 1. Alignez le joint d’étanchéité de montage et l’ensemble de feu de scène QuadraFlare avec les rondelles de vis installées précédemment et fixez avec les vis n° 8 x 1-1/2 po inox. Soyez sûr avoir l’objectif monté à l’assemblée avec le côté supérieur de l’objectif au dessus de l’unité.
-
Page 12: Entretien
Vis de montage, n° 8 x 1-1/2 po 7011238-24 Rondelle de vis 7065073 Lentille, cannelée, transparente 8012075 Support pour le dissipateur de la chaleur 8012096 Cadran facultatif en chrome, avec joint d’étanchéité QL97MC Tous droits réservés, 2010 Federal Signal Corporation -12-... - Page 13 290A6249 LEGEND LEYENDA MOUNTING SCREW, #8 X 1-1/2, S.S. TORNILLO DE MONTAJE, #8 x 1-1/2 pulg., A.I. REFLECTOR REFLECTOR CONTROL PC BOARD ASSEMBLY CONJUNTO DE TABLERO DE CIRCUITO LED PC BOARD ASSEMBLY IMPRESO DE CONTROL BASE CONJUNTO DE TABLERO DE CIRCUITO GASKET IMPRESO DE LED VEHICLE BODY...
- Page 14 7.25 (2X) 3.63 (2X) Ø 1.00 Ø .25 (4) PLCS 2.63 (2X) 5.25 (2X) 290A5840 Figure 2. / Figura 2. / Figure 2. -14-...
- Page 15 290A6248 LEGEND LEYENDA VENT HOLE ORIFICIO DE VENTILACION 3/4” COLOR CODED STICKER DOTS LOS AUTOADHESIVOS EN FORMA DE PUNTOS TO BE APPLIED TO IDENTIFY THE CODIFICADOS POR COLORES DE 3/4 PULG. CORRESPONDING PC BOARD SE APLICARAN PARA IDENTIFICAR EL COLOR ASSEMBLY LED COLOR ON EACH DEL LED CORRESPONDIENTE EN EL TABLERO SIDE.
- Page 16 www.fedsig.com...
Need help?
Do you have a question about the QUADRAFLARE QL97LEDSCENE and is the answer not in the manual?
Questions and answers