Samsung XPR Series Installation Manual page 32

2. Installation : Mounting Cabinets (Front installation)
①
①
1st cabinet/section
Hang the Brackets of cabinet/section corner on the frame.
Tighten the top every brackets to the L-shaped steel assembled on the H beam.
②
Lateral cabinet / section
②
Hang one more cabinet/section and attach it to the next cabinet/section
And disassemble some LED modules as shown.
M8 BOLT + NUT
①
M8 BOLT + NUT
X seam
M8 L18 BOLT
②
1st cabinet/section
Tighten the two cabinets/sections directly from inside the cabinet with bolts.
(doors open) At the same time, adjust the Z-seam based on the LED modules.
And Reassemble the LED modules
M8 BOLT + NUT
Tighten the top every brackets to the L-shaped steel assembled on the H beam.
Z seam
C
B
N
C
B
N
M8 BOLT + NUT
32