Samsung XPR Series Installation Manual page 119

4. Control Room Setting : System Matrix
System Matrix basic function
- Light Sensor
: The light sensor automatically adjusts the brightness to match the lighting conditions around the display.
(1) Open Setting window
Click the 'Settings' button in the main window of the program.
(2) Dimming menu
Select 'Dimming' from the drop-down menu in the upper left corner of
the Setting window.
(3) Setting the Light Sensor brightness Thresholds
.
You can specify brightness Thresholds by enabling the Light Sensor and entering the
Day Lumens / Night Lumens value.
• When enabled, the light sensor automatically controls the brightness.
• Use Global Sensor : If you check this function, you can adjust the brightness of all
displays connected to System Matrix with one light sensor at a time.
• Day Lumens : Specify the brightness Threshold value or Max output % value for
the daytime zone. If the Light Sensor value is greater than the Max output %
value, the display outputs Max brightness.
• Night Lumens : Specify the brightness Threshold value or Min output % value for
the night time zone. If the Light Sensor value is lower than the Min output %
value, the display outputs Min brightness.
119