Installing Flame Broiler Handle (Hole Side); Installing Flame Broiler Handle ( Knob Side); Mounting Flame Broiler Handle Supporter; Installing The Knobs - Pit Boss Lockhart Platinum PB2180LK Instructions And Recipes Manual

15. INSTALLING FLAME BROILER HANDLE (HOLE SIDE)

Parts Required:
1 x Main Grill/Hopper Assembly (#3)
1 x Flame Broiler Side Pull Handle (#23)
Installation:
• Insert the Flame Broiler Side Pull Handle (With Hole Side) to the hole
on the Right Side Panel of the Grill/Hopper Assembly..
16. INSTALLING THE FLAME BROILER HANDLE (KNOB SIDE)
Parts Required:
1 x Main Grill/Hopper Assembly (#3)
1 x Flame Broiler Side Pull Handle (#23)
Side Table (#21)
1 x
Installation:
• Insert the Flame Side Pull Handle (With Knob Side) to the hole on the
Side Table.

17. MOUNTING FLAME BROILER HANDLE SUPPORTER

Parts Required:
Main Grill/Hopper Assembly (#3)
1 x
Flame Broiler Side Pull Handle Supporter (#25)
1 x
1 x Side Table (#21)
2 x Screw (#B)
Installation:
• Mount Flame Broiler Slider Pull Handle Supporter to the Side Table.
Use: 2 pcs screws.

18. INSTALLING THE KNOBS

Parts Required:
1 x Main Grill/Hopper Assembly (#3)
3 x Knobs (#24)
Installation:
• Mount three Knobs to the three pull handles.

19. INSTALLING THE ASH CLEANING ASSEMBLY

Parts Required:
1 x Main Grill/Hopper Assembly (#3)
1 x Ash Cleaning Pull Handle Assembly (#11)
1 x Cart Front Panel (#12)
Installation:
• Insert the Ash Cleaning Pull Handle Assembly through the Cart Front
Panel then tighten with the bottom of Grill/Hopper Assembly.
12
15
16
17
18
19
2
1