Using Side By Side Bracket; Figure 62. Fixing Rrhs On The Pole (4); Table 22. Parts And Tools For Fixing Unit Bracket On Rrh - Samsung RT4401-48A Installation Manual

4

Figure 62. Fixing RRHs on the Pole (4)

1
RRH-0 RRH-1
5
For detailed instructions on how to use the RF alignment tool, refer to the user
manual per manufacturer.

Using Side by Side Bracket

This section describes the procedures to fix the side by side bracket.
Fixing Unit Bracket
To fix the unit bracket, do the following:
Prerequisites
Before proceeding with fixing the unit bracket, make sure that you have the items
mentioned in the table below:

Table 22. Parts and Tools for Fixing Unit Bracket on RRH

Category
Parts
Recommended Torque Value
Working Tools
RT4401-48A Installation Manual v3.0
Copyright © 2019, All Rights Reserved.
Fix the RRH-1 and RRH-2 in the same way as the RRH-0.
Check the tilt and the azimuth using the RF alignment tool and adjust when
there is an issue.
Description
Unit Bracket
Fasteners M6 × L20 hexagonal. bolt (Washer
assembly)
M6 hexagonal bolt
 Torque Wrench (10 to 50 lbfin)
 Torque Wrench Spanner Head (apply hexagonal head: 10 mm)
 Spanner (apply hexagonal head: 13 mm)
Chapter 2 Installing System
2
RRH-0 RRH-1
RRH-2
1 EA/RRH
4 EA/RRH
43 lbfin
62