Prerequisites
Before proceeding with swivelling the RRH, make sure that you have the items
mentioned in the table below:
Table 15. Tools for Swiveling RRH
Category
Recommended Torque Value
Working Tools
1
Figure 42. RRH Swivelling Adjustment (1)
2
RT4401-48A Installation Manual v3.0
Copyright © 2019, All Rights Reserved.
Description
M12 hexagonal nut
Torque Wrench (100 to 400 lbfin)
Torque Wrench Spanner Head (apply Hex. head: 19 mm)
Spanner (19 mm)
RF Alignment Tool
Loosen the RRH by turning M12 hexagonal nut of mounting bracket two or
three times counter clockwise.
Do not separate it completely.
Pull the RRH left/right to adjust the swivelling angle.
1
2
Chapter 2 Installing System
372 lbfin
M12 Hex. Nut
44