When poor leveling happens, adjust the position of fasteners used to fix the
mounting bracket.
After fixing the steel band, push the remainder of band inside the mounting
bracket.
Lifting RRH
To lift the RRH, do the following:
Lift the RRH with a cherry picker.
Figure 29. Lifting RRH
Cherry Picker
Fixing RRH on the Pole
To fix the RRH on the pole, do the following:
Prerequisites
Before proceeding with fixing the RRH on the pole, make sure that you have the
items mentioned in the table below.
Table 8. Parts and Tools for Fixing RRH on the Pole
Category
Fasteners
Recommended Torque Value
Working Tools
1
RT4401-48A Installation Manual v3.0
Copyright © 2019, All Rights Reserved.
RRH
Operator
Description
M8 × L30 hexagonal bolt (Washer assembly)
M8 hexagonal. bolt
Torque Wrench (100 to 400 lbfin)
Torque Wrench Spanner Head (apply hexagon head: 13 mm)
RF Alignment Tool
Place the unit bracket on the fixing groove of the mounting bracket.
Chapter 2 Installing System
Mounting Bracket
1 EA
110 lbfin
31