Figure 31. Fixing Rrh On The Pole (2) - Samsung RT4401-48A Installation Manual

Figure 31. Fixing RRH on the Pole (2)

When installing the RRH, the tilting angle pointer of the unit bracket should point
to 0°.
[Angle pointer position for unit bracket with
3
For detailed instructions of how to use the RF alignment tool, refer to the user
manual per manufacturer.
RT4401-48A Installation Manual v3.0
Copyright © 2019, All Rights Reserved.
(Washer Assembly)
0° tilt when installing the RRH]
Check the tilt and the azimuth using the RF alignment tool, and adjust when
there is an issue.
1
M8 Hex. Bolt
2
Tilting angle scale of the unit bracket
Chapter 2 Installing System
33