Table 9. Tools For Marking - Samsung RT4401-48A Installation Manual

Fixing Wall Type_1 Sector
This section describes the procedures for fixing the system on the wall.
Fixing Mounting Bracket
To fix the mounting bracket on the wall, do the following:
Prerequisites
Before proceeding with fixing the mounting bracket for 1-sector on the wall, make
sure that you have the items mentioned in the table below.

Table 9. Tools for Marking

Category
Working Tools
To mount the system on a wall, perform the leveling test by referring to the
System Leveling to check the positions that are marked to be horizontal or vertical
before the drilling process. If the result shows that they are not horizontal or
vertical, modify the marking positions.
When the position where the system will be placed is determined, place the system
on that position and then mark the positions where anchor bolts will be fixed. This
will reduce marking error range.
1
RT4401-48A Installation Manual v3.0
Copyright © 2019, All Rights Reserved.
Check the distance between the location for fixing the RRH and the anchor
bolt hole.
Description
 Tape Measure
 Permanent Maker
 Level
Chapter 2 Installing System
34