Return; Disposal - Endress+Hauser Condumax CLS15D Operating Instructions Manual

Condumax CLS15D/16D/21D
Recommended intervals for seal replacement (reference values)
Application
Media with temperatures from 50 to 100 °C (122 to 212 °F)
Media with temperatures < 50 °C (122 °F)
Sterilization cycles, max. 150 °C (302 °F), 45 min.
To ensure your sensor is operational again after being exposed to very high loads, you can
have it regenerated in the factory. In the factory, the sensor is fitted with new seals and
recalibrated.
Please contact your sales office for information on replacing the seal and recalibration in the
factory.
8.2

Return

The product must be returned if repairs or a factory calibration are required, or if the wrong
product was ordered or delivered. As an ISO-certified company and also due to legal
regulations, Endress+Hauser is obliged to follow certain procedures when handling any
returned products that have been in contact with medium.
To ensure the swift, safe and professional return of the device:
‣
Refer to the website
procedure and conditions for returning devices.
8.3

Disposal

The device contains electronic components. The product must be disposed of as electronic
waste.
‣
Observe the local regulations.
Endress+Hauser
www.endress.com/support/return-material
Window
Approx. 18 months
Approx. 36 months
Approx. 400 cycles
for information on the
Repair
23