Default Settings Menu; Menu Lock - UCL SWIFT ILSINTECH K33A Owner's Manual & User Manual

DEFAULT SETTINGS MENU

There are 4 specifi c Default options. See the chart below for and explanation of each
unique function. To activate a Default option, enable a check in the box next to the option
and to disable an option remove the check in the box next to the option. Select the check
mark to save your changes.
PARAMETERS DESCRIPTION
Auto Splice Performs the splice process automatically upon closing with wind
cover with no pause after the fi nal alignment.
Pause 1 Pause 1 Stops after initial fl ash clean process completes. Press Stops after initial fl ash clean process completes. Press
goes to the next step.
Pause 2 Pause 2 Stops after fi nal alignment completes. Press Stops after fi nal alignment completes. Press
fi nal splice.
Auto Heat Powers on the sleeve heater automatically once the wind cover is
opened after splicing a successful splice.
70 | SWIFT K33A ALL IN ONE FUSION SPLICER

MENU LOCK

Menu Lock enables the user settings for Splice, Heat, Memory and Password to be locked/
enabled to minimize the ability of these features to inadvertently be changed. To activate
the protection of these settings, place a check in the box next to the feature and to disable
remove the check next to the feature. You have to remember the password, if you forget or
lose the password the K33A will need to send it in for service to resolve this issue.
TEST ITEM
1 Splice Lock
2 Heat Lock
3 Clear memory Lock
and it and it
4 Password Query
to perform the to perform the
DESCRIPTION
Locks the ability to change the splice mode settings
Locks the ability to change the heat mode settings
Lock the ability to change or delete the memory data
Initiates a password menu, the default password is "1234".
americanilsintech.com | 71