Table of Contents
Advertisement
THERMAL STRIPPER MENU
The K33A has an onboard thermal stripper that provides the most effi cient, consistent and
damage free process to strip the protective fi ber jacket from the fi ber it protects. Fiber
jacket types vary by manufacturer and the K33A has default setting for the most common
fi ber types in the market today. We constantly update our data base with new fi ber types
but on occasion settings need to edited due to new technologies and environmental
factors.
SELECTING A THERMAL STRIPPER SETTING
From the main menu press
From the main menu press
on either the K33A or its touch screen. Next select
on either the K33A or its touch screen. Next select
stripper from the touchscreen menu. This will display the preset Stripper settings where
the user can select the required setting. Up to 100 unique Auto Stripper settings can be
programmed into the K33A. Please note that settings 1-13 cannot be Deleted or Replaced
but can be Edited. New customized settings can be created.
DELETE A THERMAL STRIPPER SETTING
Only user created thermal stripper settings can be deleted. To delete a user setting from
Only user created thermal stripper settings can be deleted. To delete a user setting from
the ready menu press
the ready menu press
on either the K33A or its touch screen. Using the arrows on the
on either the K33A or its touch screen. Using the arrows on the
LCD screen sroll unitl the setting to be deleted is on the LCD screen. Select the stripper
mode to be deleted on the LCD screen and press the DEL button and the setting is
deleted. Select the return icon to return to the Stripper menu then Ready to return to the
ready screen.
64 | SWIFT K33A ALL IN ONE FUSION SPLICER
REPLACE A THERMAL STRIPPER SETTING
Only a user created Thermal Stripper setting can be replaced. To replace a Thermal
Only a user created Thermal Stripper setting can be replaced. To replace a Thermal
Stripper setting from the ready menu press
Stripper setting from the ready menu press
Using the arrows on the LCD screen scroll until the setting to be deleted is on the LCD
screen. Select the stripper mode to be replaced on the LCD screen and press the REPLACE
button and the default Thermal Stripper settings are displayed. Select the desired thermal
stripper setting and the setting replaces the old setting. Press the icon to return to the
Stripper menu then Ready to return to the ready screen.
The REPLACED Stripper mode replaces the last blank mode.
NOTE:
Thermal Stripper modes from 1-13 cannot be replaced.
on either the K33A or its touch screen.
on either the K33A or its touch screen.
americanilsintech.com | 65
Advertisement
Table of Contents
