Table of Contents
Advertisement
SETTING
LANGUAGE:
select the display language.
DATE:
set the current date & time.
POWER SAVE:
set a sleep function of the Swift K33A to conserve the battery
BUZZER:
change a buzzer volume.
LCD BRIGHTNESS
changes the monitor brightness.
INFORMATION
MAINTENANCE INFO:
display a date for maintenance.
SENSOR VALUE:
display a temperature, pressure and humidity.
PROGRAM VER:
display the version.
HELP:
display the help contents as below.
THE NAMES OF PARTS
CLEAN AND INSPECT
WARNINGS
A/S CONTACT LIST
POPUP MENU
The pop-up menu is new feature on the Swift K33A. The purpose of the pop-up menu is to
allow quick access to frequently used modes for the Thermal Stripper, Sleeve Heater and
Splice Chamber. The user can quickly change setting without having to navigate into the
main menu. The user can access the pop-up menu in various ways.
NOTE:
The following procedure will provide instructions on how to assign and delete a setting to
the Heater Popup buttons. For the Thermal Stripper and Splice popup buttons the same
process outlined below is used but instead of selecting Heater from the display screen
select either Stripper or Splice to program the desired buttons.
46 | SWIFT K33A ALL IN ONE FUSION SPLICER
PROGRAMMING THE HEATER POPUP BUTTONS
Adding A Heater Mode Setting to a Popup Button
To Navigate to the Heater Pop-Up Menu select "Heater" on the LCD Display main screen (below)
in the Ready state.
This will bring up the Heater Popup Menu showing the 8 programmable shortcut buttons as well
the trash (delete) and previous menu buttons.
Select an Empty Button That Has No Setting
americanilsintech.com | 47
Advertisement
Table of Contents
